Display per page
Sort by
Product no.: I-302050

General Info:


LC Series

Low Cure


The LC Series is WM’s most versatile series on the market, enabling printers to print on the most difficult substrates. Not only does this system hold up to the worst bleeders, but at the lower cure temps it

could save a shop a ton of money in reduced energy costs.



-Direct printing

-White or colored garments-100% Cotton garments

-Cotton/Polyester, Acrylic, Polyester, Polypropylene

pandex and stretchable substrates


Bleed Resistance: Excellent

Opacity: High



-Superb Bleed Resistance

-No Ghosting

-Great Stretchability

-Easy to print viscosity

-Great replacement for silicone inks

-Flat, smooth finish for multi-color printing



Storage: 70º to 80ºF. Due to the ability to cure at low temperatures, this is extremely important. Ink will become thicker over time but can be reduced to a printable viscosity.

Mesh: 61-230

Stencil: Any direct emulsion or capillary film.

Wet on Wet Printing: Can be printed wet-on-wet to increase production.

Modifications: Modifications are not recommended unless completely necessary. To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020) & puff use Puff Additive

(I10-9903). ANY modification will effect Low Cure properties.

Squeegee Hardness & Angle: Medium to hard at a 45 degree angle. Flashing: 700ºF for 3-5 seconds, just enough for the surface to be tack free. Squeegee Blade: Sharp.

Fusion/Curing: 230ºF/121º C for 1 ½ - 2½ minutes. 325ºF/163º C for 1 to 1 ½ minutes.

Wash-up: Any plastisol cleaner.

starting at $72.45 / gal *
Product data sheet

In stock

Prices plus sales tax, plus delivery